HKE TEK CO LIMITED
Company Introduction HKE TEK CO., LTD.
Add to Cart
Newest Anti-theft alarm retail security display stand for smartphone-2111st
1. security display holder with alarm for mobile phone
2.High-grade and simple design for iPhone
3. charging interface availabe
security display holder with alarm for mobile phone
Technical parameter
| 1.Main material: ABS Plastic |
| 2.Color: transparent |
| 3.Size: 6cm*5cm*5cm |
| 4.Internal Battery type: 3.7V rechargeable lithium battery |
| 5.External power adapter: DC5V 1000MA |
| 6.Battery Standby Time: 3 months |
| 7.Battery life:5 years |
| 8.Alarm sound:105DB |
Unit list
| 1: mobile phone anti-theft alarm holder/stand host base with USB charging cable (with a rechargeable lithium battery inside) 1 set |
| 2: Alarm sensor probe(with a magnetic back, paste 3M adhesive. Extension cords.) 1 set |
| 3: Power adapter 1 pcs |
| 4: Cell phone charging adapter cable 1 pcs |
| 5: Operation Manual 1pcs |
| 6: 3m sticker 1 set. |
It will alarm in following conditions:
| 1) Unplug or cut the cell phone charging cable |
| 2) Remove the cell phone from sensor |
| 3) Unplug or cut the sense cable |
| 4) Remove or pry the holder on the bottom |
Detailed pictures
Function:
off-line alarm: holder will alarm when cable is cut off
sensor alarm: alarm when sensor fell off holder
designed specially for protection of cell phone, Mp3…
with inbuilt high decibel buzzer
remote controller to unlock
Optional charging interface; 16 and 21cm available
White or black top or bottom available
It is the most innovative security alarm display system.
1) Prevent your displaying electronics from stealing
2) It's convient for the customers to see mobile phone,camera,laptop,MP4 in the exclusive shops, etc.
3) With the connection of the electronics to the display shelf, security display holder can realized immediately while removed.
4)Charging and anti-theft alarm for mobile phone
PERFECT Alarm Function
The security alarm display holder will alarm when it happens by any way of the follow:
1) Circuit break resistance
2) Short circuit resistance
3) Other circuit-replacing resistance
4) Prying and cutting resistance
5) Remove the sensor
6) Cut the spring wire
7) Put out the connector
8) Put out power connector- alarm
When remove or pry the stand on the bottom, the antitheft function also can be available.
Product Installation
1)put on the base anti-theft contact sets
2)stickthe security stand to the surface of the desk
3)adhesive the bracket to the phone back
4)adhesive the mouth head to the front of the phone
5)connect the mouth head protector
6)connect the power adaptor
7)turn on the security display
8)installation finished
1, Suitable for cellphone and other handhelds
2, Function charge+alarm
3, Power supply external, 5.5V 1A.plug standard optional
4, Phone charging port on holder MINI USB
5, Have or No sensor on surface of the phone(optional)
6, Shunt-wound sensors
7, External spiral cable
8, Color White/Black/Transparent
9, Remote control remove the alarm
10, charging&security cable optional